Menu

Custom Products

Your work is unique, which means you need a unique drill. If we don’t carry one that fits your specific application, we’ll build one that will.

Barrier Wall Drill

Barrier Wall Drill

Custom

Many contractors face new state regulations requiring concrete barriers to be pinned, so Minnich engineers designed an efficient unit that ensures safe hole drilling for those pins. Powered by an air compressor and also barrier-mounted, it rides along the top of the barrier, drilling three holes and then moving on. Eliminating manual drilling saves you time and money and reduces the strain on workers. Since the drill has a tethered controller, operators can be stationed on the non-traffic side of the barrier and at a safe distance away from harmful debris and dust.

Core Drill

Core Drill

Custom

Specially designed for a project at Hartsfield-Jackson Atlanta International Airport, this custom Minnich core drill stepped up to meet tough specifications. The unit needed to be able to core drill a four-hole pattern into the side of an elevated platform — a job requiring precise measurements so that certain steel plates would easily fit to the wall. Minnich used a self-propelled platform that carries four pneumatic core drills, which successfully drilled the correct pattern and hole number on the platform. In addition, the unit’s ability to pull a compressor and water tank makes it a self-contained job.

Custom Tunnel Drill

Custom Tunnel Drill

Custom

Drilling at an upward angle is not a common application for everyday drills. So that’s why Minnich designed a custom utility drill for Aztec General Contractors — they needed an efficient repair mechanism for a storm trench application in Colorado. The drill solved both problems, letting workers drill at variable angles and work in tight surroundings.

Mudjacking Drill

Poly Leveling Drill

Custom

This custom unit consists of three 50 lb. rock drills mounted to a self-propelled platform assembly. It’s able to drill three vertical holes up to 25” deep and features convenient adjustable hole spacing and bed assemble back-tilt ability. Adding to the convenience, only one vehicle is needed on the job site since the unit can tow the compressor itself.

Punch Drill

Punch Drill

Custom

Minnich’s specialized punch drill was created for Archer Western on a project for the Orlando Airport Commuter Train. It features a four-gang punch system that punches approximately 100,000 holes in 3/8-inch steel I-beams. The holes are four inches deep and 1 1/16 inches in diameter. The modified drill is also outfitted with hydraulic/electric punch tools.

Upcoming Events

« Prev Event
Next Event »
';