Minnich A-3SCW/A-4SCW/A-5SCW on-slab self-propelled wireless units increase drilling efficiency, accuracy and safety. Wireless remote control technology enables operators to drill up to five holes at once and drive down the slab to drill the next set of holes — all while standing in the grade away from the equipment. From this clear vantage point, operators can drill faster and more accurately while avoiding dust, debris and obstacles. Power crab steering further boosts efficiency by letting operators drive down the slab without raising and lowering the drill bed.
See All Features
|Drill Steel Shank||.875" x 4.25" (22.2mm x 107.9 mm)|
|Drill Steel Length||24" (61.0cm)|
|Drill Bit Diameter||.625" - 2.50" (15.9mm to 63.5mm)|
|*Maximum Drill Depth||18" (45.7cm)|
|Drill Distance From Top of Slab||3.5" - 12" (8.9cm to 30.5cm)|
|Minimum Cutout Width||48" (121.9cm)|
|SCFM Required||92.2 (43.5D m3/sec)|
|PSIG Required||110 (7.58 BAR)|
|Weight A-3SCW (basic)||2860 LBS (1297 Kg)|
|Weight A-4SCW (basic)||3260 LBS (1433 Kg)|
|Weight A-5SCW (basic)||3460 LBS (1569 Kg)|
Specifications shown are standard. Variations to the standard are available.
*Based on 2 piece steel and bits. Whirlybits should be 1" (2.5cm) longer for maximum depth.
How to make sure your concrete dowel pin drill is receiving the proper amount of lubrication. By Rob Minnich
This video touches on key points of daily maintenance for small concrete dowel pin drills. By Rob Minnich
Building any kind of road, from interstates to side streets, can be a long, expensive and drawn-out process. Infrastructure is in an…
Minnich Manufacturing’s A-4SCW with dust collection system drilling on Fort Lauderdale-Hollywood International Airport. The A-4SCW is in Minnich’s patent pending wireless line…
Choosing the right concrete dowel pin drill for the job can be difficult. With several models to choose from, how do you…