our people make the difference
HV-2 Series
With a head diameter of 2-5/8”, Minnich HV-2 Series hydraulic internal paving vibrators are ideal for most slip-form applications. Minnich paving vibrators are designed to withstand the rigors of the industry. For mainline paving, a block isolator offers better shear spring rate, less area for concrete build-up and a greater rubber-to-steel bond area. This translates to less end-of-day clean-up time, reduced transfer of vibration to the paver and less wear on the isolators. A two-isolator setup can fit into tighter areas for barrier wall molds. The hydraulic hose features an abrasion-resistant coating to help reduce vibrator failure. A specially designed Minnich three-gear motor provides hydrostatic balance for longer motor life and greater starting torque.
Features
Minnich Vibrator Advantages Include:\n
Round Vibrator Heads
- Better consolidation
- Greater amplitude
- Greater velocity
- Greater influence
Block Isolator
- Standard on all paving models
- Better shear spring rate
- Less area for concrete build up
- Greater rubber to steel bond area
Armor Coated Hydraulic Hose
- Greater wear resistance
Minnich Designed and Built Hydraulic Motor
- Three gear motor provides hydrostatic balance for longer motor life
- Case hardened steel drive shaft and gear set
- Designed to provide greater starting torque
- Easy access to seal without complete tear down
Easy to Repair
- Factory repair schools and repair videos available
- Factory qualified dealer/repair network
- Any up-grades can be retrofitted to existing vibrators
Same Day Shipping
- Same day shipping on standard parts and most vibrator orders
24/7 Test Lab
- 24/7 product testing and on-going product improvement
Specifications
| Model | HV-2 Series |
|---|---|
| Head Diameter | 2-5/8" (66.67mm) |
| Centrifugal Force (10,000 VPM) | 2,232 LBS (9,930N) |
| Amplitude | 0.126" (3.20mm) |
| Diameter of Influence @ 10,500 VPM | 26.50"-30.50" (673.1mm-774.7mm) |
| Diameter of Influence @ 8,000 VPM | 20.25"-24.25" (514.3mm-615.9mm) |
| Maximum Flow | 4GPM (15.14 l/min) |
| Normal Operating Pressure | 800-1,300PSI (5.51-8.96MPa) |
| Back Pressure Maximum | 150 PSI (1.03MPa) |
| Rated For Pressure Up To 2500PSI (17.24MPa) |